BLDG1014 Non-Residential Building Group Presentation Assessment Answer

Introduction

• Albury is a well-known region of New South Wales
• It is popular for non-residential building establishment
• It is a well-developed region among others

In this slide, the lands of Albury within the region of New South Wales are totally cleared for the development of non-residential buildings. However, to make it satisfactory for the clients, an eye-catching design is developed along with the finest quality and affordable cost. So that, it can be preferred and liked by the target customers of the region as it was a site for the development of warehouses. Contrary to this, it can be stated that failure to ensure such types of aspects for the clients, could result in the entire failure of the project.

Foundation and Footing system

• Foundation changes as per the designs
• It acts as a supportive system for the buildings
• Footing of the construction is done as per the location

The foundation of the buildings is one of the essential requirements. It needs to be developed as per the designs of the building so that, it can support the entire structure effectively. The footing system of the building is introduced as per the area and location of the site.

Walls of the Non-Residential Project of Albury

Tilt-up Walling is Used

• It makes the walls long-lasting for the future

Pouring is within the mold

• It makes the wall more thick and durable in characteristics

This slide mentions the features that need to be maintained to make the walls for durable for the future time. To make it, the tilt-up walling procedure is considered so as to make it tougher within the mentioned budget. However, to do so, the concrete needs to be poured within the mold and needs to be kept for drying for a considerable time. Then it is attached to the other parts such as the roof and pillars. This makes the building more sturdy and strong which can bear varied types of natural disasters and remain accurate for the long run.

Roofing System

• Roofing system improves the design of the building
• It is developed considering the location
• It also focuses on a budget of the building

The roofing system depends on the design of the building. It is prepared in such a way so that it can be prepared in a simple and easiest manner keeping in consideration of the budget. This is developed by identifying the location of the site.

Suspended Floor Systems and Stair

• A suspended floor system is highly preferred in buildings New South Wales
• The Stairs need to be developed as per the rules of New South Wales
• It needs to be in a horizontal thread

This slide mentions the concept of Suspended Floor Systems in non-residential projects of New South Wales. According to this, the slabs of the floors are not suspended from the ground. They are quite above it and it becomes quite easier to run the wires of the buildings. It is used in the parking areas of the basements. It is quite effective in order to prevent abrasion in these regions. On the other hand floor system and stairs are entirely based on the type of sites and designs.

Fit-out

• Fit-out is used to present the ready space for the tenant
• It is an essential part of commercial buildings
• It is dependent on the time

This slide describes the aspect of Fit-out. It includes accurate space within the interior of the building so that the individual or tenant can move easily within the building. It is an important aspect for commercial aspects as the tenant can use the building while its construction work is going on.

Project Delivery Method

• Project Delivery Method is quite useful for the construction works
• It includes many methods used in New South Wales projects
• It differs as per the design and size of the projects

In this slide, the project delivery method is discussed. There are single-point delivery methods along with multiple delivery methods. In a single delivery process, a single contractor manages the entire process of construction and he can easily detect the errors and resolve it in the lowest time frame. However, in the case of multiple point delivery method, numerous contractors are involved and it results in chaos in the procedure of construction. In the above process, the total cost of the project remains quite low which is an advantage of, as compared to the other process

Specifications

• Specifications are the designs on which the building is developed
• It includes both types of specifications for the walls
• The parking lot, stairs, and basement is designed as per the specifications

In this slide, specification details are mentioned. The specifications of building D along with its mezzanine details are developed as designed. Besides this, the building has a parking lot and a stair lot of 64.80m2. The total area of the building is 1090m2 and it is entirely supported by floor and a base made of concrete materials. Other than this, both types of reinforced retaining walls or tilt-up walls are taken into consideration for this building. Along with this, the NATSPEC standard specifications are also quite useful for the purpose of development.

Conclusion

In this slide, the conclusion is presented. It can be mentioned that a wide number of building techniques are mentioned in this project and capabilities essential in completing the entire structure of the buildings are also described. The core components and materials used to do so are also prescribed in this project. Thus the Albury Property is ready for excavation and the risks need to be analyzed by the entire team members so as to mitigate them quickly.

References

Buckman, A. H. (2020). What is a smart building?. . Smart and Sustainable Built Environment .

Hampson, K. D. (2020). Construction of 2020 buildings . A vision for Australia's property and construction industry.

Marcher, C. G. (2020). Decision support in building construction: A systematic review of methods and application areas. . Buildings .

Buckman, A. H. (2020). What is a smart building?. . Smart and Sustainable Built Environment .

Hampson, K. D. (2020). Construction of 2020 buildings . A vision for Australia's property and construction industry.

Marcher, C. G. (2020). Decision support in building construction: A systematic review of methods and application areas. . Buildings .

Buckman, A. H. (2020). What is a smart building?. . Smart and Sustainable Built Environment .

Hampson, K. D. (2020). Construction of 2020 buildings . A vision for Australia's property and construction industry.

Marcher, C. G. (2020). Decision support in building construction: A systematic review of methods and application areas. . Buildings .

You Might Also Like:-

• Engineering Materials Technical Writing Report Sample
• Civil Engineering Assignment Help Service
• Engineering Assignment Help